Fence calculator
Enter the total fence length and your post spacing. We'll count posts, sections, rails and pickets.
How many fence posts do I need?
Divide the fence length by the post spacing (usually 6 or 8 feet) and round up to get sections, then add one post for the end. Add extra posts for corners and gates. A 100-foot straight fence with 8-foot spacing has 13 sections and needs 14 posts. For pickets, divide the length in inches by the picket width plus the gap.
How we calculate this
Sections = length รท post spacing, rounded up. Posts = sections + 1 + one extra for each corner and gate (a common planning rule; your layout may differ). Rails = sections ร rails per section. Pickets = length ร 12 รท (picket width + gap), rounded up, plus 5% extra. Check local rules and call 811 before digging. Saved only on this device.
Questions moms ask
6 ft or 8 ft post spacing?
8 ft is common for wood privacy fences. 6 ft is sturdier and common for vinyl. Check your panel size.
Do I need to call before digging?
Yes. In the US, call 811 a few days before you dig so buried lines can be marked.
How deep should posts go?
A common guide is about a third of the post's height in the ground, but follow local codes and your fence maker.
Is it saved?
Yes, on this phone only.
Related tools
This tool gives an estimate, not medical advice. Every pregnancy and every baby is different. If you're worried about anything, talk to your doctor or midwife.